The Precision Sheet Metal Chronicle
Fall 2011 The Worlds First E-magazine dedicated to the
Precision Sheet Metal trade!
This edition features an outtake from our DVD
Press Brake Safety
Copyright 2011 Asma LLC
Back Issues:
Fall 2011
Press Brake Safety
Learn about "open heights" and "shut
heights" and how they
are applied at the press brake.
Press Brake safety
ISBN 1-929513-30
Summer 2011
Reading & Editing G-Codes
Improve your G-code editing skills with a quicklook at
basic G-code programming for the machine operator. From
Reading and Editing G-codes for precision sheet metal DVD
ISBN 1-929513-61
Spring 2011
Flat Pattern Development
Learn how forming methods and variations in bend deductions can
affect the flat pattern layout. From our
Flat Pattern Development DVD
ISBN 1-929513-26
Winter 2011
Press' and Press Brakes
Learn the differences between a stamping press
and a press brake. We look at the different type of press brakes
and how they operate. From our DVD
Press Brakes and Methods
ISBN
1-929513-26
Fall 2010 Laser
lens cleaning
Care and maintenance of the CO2 laser's optics are covered in the issue.
The care and cleaning of the lens is reviewed.
From our
DVD Laser Assist Gases and Focus
ISBN 1-929513-58>
Summer 2010
Theory of hole punching
A review of hole punching basics including the phases of punching and the application
of die clearances. These are a few outtakes from
The Theory of Hole Punching
ISBN 1-929513-46
Spring 2010
Squaring Shear
What are the different types of shears? What is Rake? Camber? Twist? A brief look
at the squaring shear from our DVD
The Squaring Shear
ISBN 1-929513-41
Winter 2009
Blueprint reading
A look at basic
Blueprint
Interpretation for precision sheet metal from
our DVD
by the same name. In this issue we look the features of the print and the tolerance block
ISBN 1-929513-38
Other Videos
Enshrining
tools the cult of the sacred box
Read or watch our first video article on dedicated press brake
tooling.
Learn the best practices for your press brake tooling.
Introduction to
DVD series
An introductory montage video from Asma's DVD library
including looks at: Bend Functions, Press Brakes and Methods, Punches, Dies, Other tools and Methods,
Bottom Bending and Safety
Asma offer training and DVD programs in the following areas:
| Shop Basics Press Brakes Squaring Shears Inspection and QC The Punch Press The Theory of Hole Punching Laser Fundamentals The Laser Medium Laser Assist Gases and Focus Laser Programming and Safety Flat pattern development Reading and Editing G-codes Extremely Small Parts |
In-house
training /
DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's In-house training / DVD's |
To subscribe to The Precision Sheet Metal Chronicle or leave a comment email steve@asmachronicle.com