Specializing in Precision Press Brake Training and Forming

DVDs, sheet metal, press brake, Steve Benson, press brakes
News

Find out what is happening at Asma LLC by regularly visiting this page and our Calendar page where you will find upcoming events.

Top Stories

  • 12/24/2011 Updated tool

    ASMA software has been updated to the
    new Windows.net OS (Vista/7) Solves most press brake issues by calculating real world bend deductions based on method, material tensile, your die selection...

    This software is perfect for the engineering department it is an invaluable tool for the operator. Even warning when die selections become to small or when tonnage exceeds your preset limits.

    A must for hassle free forming!

  • 7/5/2011 New Forming Chart
    New Forming Flow Chart that will make your job easier

  • Precision Press Brake Certificate Course
    Get intensive training and earn a Certificate in Precision Press Brakes!
  • 6/4/2011 Joins FaceBook and Twitter
    Pays us a visit or send us a tweet

  • 6/1/2011 New site Pages
    Read a large collection published articles written by
    Mr. Benson
     
  • 5/21/2011 New DVD Manufacturing Extremely
    Small Sheet Metal Parts
    Learn how to deal with sheet metal parts that are under .020-inches thick, linear tolerances of .001-inches and a half a degree of bend angle.

  • 5/21/2011 New DVD Reading and Editing G-codes
    for Sheet Metal
    G-code programming and editing at the controller for the operator/technician.

    Learn about coding while we program a clutch disk for a 1913 Excelsior Auto-cycle (motorcycle) 

  • 4/16/2011 New Video player for Asma's
    online content:
    The Precision Sheet Metal Chronicle
    Enshrining tools - the cult of the sacred box
    Introduction to our DVD series

  • 4/14/2011 New DVD
    Basic Flat Pattern Development
    Learn layout and notching the hard way; know what
    your CAD system is doing in the background.

  • 3/16/2011 3 New Narrated PowerPoint's
    1) Manufacturing Extremely Small Parts
    2) Basic Flat Pattern Development
    3) Reading and Editing G-Codes for sheet metal

  • 12/20/2010 Enshrining tools The Cult of the Sacred Box
    A video Article

  • 7/29/2010 Complete sheet metal fabrication library
    We are proud to announce the completion of our
    44-piece Interactive Textbooks, Software and DVD library!

                        Box set

  • 7/18/2010 4 New DVD's
    1) Laser Fundamentals
    2) The Laser Medium
    3) Laser Assist Gases and Focus
    4) Laser Programming and Safety

  • 7/18/2010 4 New Narrated PowerPoint's:
    1) Laser Fundamentals
    2) The Laser Medium
    3) Laser Assist Gases and Focus
    4) Laser Programming and Safety

  • 5/15/2010  2 New DVD's:
    1) The Punch Press
    2) The Theory of Hole Punching

  • 4/21/2010 Two New Narrated PowerPoint's:
    1) The Punch Press
    2) The Theory of Hole Punching
     
  • 1/4/2010  2 New DVD's
    1) Inspection and Quality Control
    2) The Squaring Shear

  • 10/1/2009 New format
    The Precision Sheet Metal Chronicle has joined the
    21st Century by going to a new VIDEO format.

    5-minute clips from our inspired video library on precision sheet metal.

  • 9/1/09 New DVD "What your trainers aren't teaching you about press brakes"

    Originally presented as a "FabCast" for the FMA this PowerPoint presentation has been converted to DVD and is now available for your review on your company television or computer.

    Learn what you may and may not be doing correctly when it comes to engineering for or the operating of press brakes    .

  • 6/1//09 Three new DVD's are now available that cove the basics of precision sheet metal. They include: Calculator Mathematics, Blueprint Interpretation and Precision Hand Measurement Tools.

  • 5/1/09 Asma joins up with LinkedIn.com http://www.linkedin.com/in/stevedbenson

  • 3/1/09 Narrated PowerPoint's
    Have you been to one of our press brake or sheet metal basics seminars/workshops? Now you can get a copy of either; narrated by industry expert and presenter Steven D. Benson.

    Broken into easily to digestible segments, these narrated PowerPoint's are powerful learning tools and
    are great addition to any sheet metal library!
  • 2/18/2009
    Tour our manufacturing Photo Gallery!

  • 2/1/09 DVD videos
    Asma LLC is proud to announce the first eight DVDs of a seventeen DVD set. The first eight covers the subject of Press Brakes; from calculations to safety.

    We are expecting the next three: Calculator Math, Blueprint Interpretation and Precision Hand Measurement Tools.

  • 6/1/08 Micro-Sheet Metal Manufacturing
    Asma LLC expands in to manufacturing. Focusing on forming (our specialty) we work with materials under .015 inches thick and with manufacturing tolerances to .001 inches.

    From your world view drawing to the finished part; we can handle the most delicate of designs.